Buying UPS Spare Parts? Here is What You Should Know About UPS Maintenance
UPS (Uninterruptible Power Supply) is an important device as it provides backup power to servers and other critical equipment in the event of a power outage or other power-related issues. If you are planning to buy UPS spare parts, here are some UPS maintenance tips that you should know:
1. Keep the UPS dry and cool:
Temperature and humidity can affect the performance and safety of a UPS system. If the temperature is too high, it can damage the internal components of the UPS. Similarly, high levels of humidity have the potential to cause condensation and corrosion within the UPS, limiting its efficiency and lifespan. It is critical, therefore, that all UPS systems be installed and operated within their specific temperature and humidity range for optimum performance.
2. Store the UPS batteries in good condition:
To ensure that the batteries remain in good condition over extended periods of time, keep them in a cool, dry place and avoid direct sunlight and any damp environments that could damage them. Recharging the batteries to around 50 to 60 percent before storing can extend their lifespan.
When storing the batteries, it is important to avoid both fully charged and discharged states. Also, do not store batteries in close proximity to any flammable materials or metal objects. Following these precautions will help you preserve your batteries for future use.
3. Check water level:
Checking the water level in a UPS battery is important to increase its lifespan. Before checking the water level, make sure that the UPS is turned off and unplugged to ensure your safety. Also, locate the water level indicator on the battery and check if the water level is in between the minimum and maximum fill lines. If it is low, add distilled water to reach these lines, but be careful not to overfill it. Then you should check again after adding water. This process should be repeated every 3-6 months or as necessary. You should also wear protective equipment such as gloves and eye protection. Also, never use tap water as it contains minerals and impurities that could damage the battery in the long run.
4. Ensure that the area is clean:
Cleanliness is essential when it comes to storing UPS. Dust and dirt can adversely affect the performance of the UPS. When left unchecked, these unwanted elements can accumulate in and around the device, causing components to overheat. In addition, mould and mildew could also damage internal components that could adversely affect the electronic components inside. Clean, organised storage spaces minimise the chance of contamination while reducing the danger of fire hazards.
4. Run UPS in energy-saving mode:
By running a UPS in energy-saving mode, it is possible to save significant amounts of energy, money and time. Running UPS in energy-saving mode also helps to reduce the heat generated by the device, thus increasing its lifespan.
Are you looking to buy unused UPS spares?
You can buy unused and genuine UPS spare parts at mjvaluemart, a multi-vendor platform. To buy genuine and unused spare parts, register here.
